Compaq 228399-373 Manual De Usuario

Descargar
Página de 73
3-14 U
SING
 Y
OUR
 C
OMPUTER
   M
Y
 P
RESARIO
—G
ETTING
 S
TARTED
Removing a Disc from a Drive
1. Press the Load/Eject 
button
 to 
open
 the 
drive
 
door.
2. Carefully remove the CD or 
the DVD from the drive.
3. Press the Load/Eject 
button on the front of the 
drive to close the door.
4. Store the disc in its 
protective case. 
Playing an Audio CD
1. Press the Load/
Eject button to 
open the drive 
door. Place the disc 
into the round area 
of the slot, label 
side facing upward 
for desktop 
configuration. Hold the disc with label facing outward for the 
upright position. If the tray contains support tabs, carefully slide 
the disc under the tabs to correctly position it in the tray.
2. Press Load/Eject button to close the drive door.
3. If, after a few seconds, the disc does not automatically start 
playing, press the Play/Pause button on the keyboard. 
4. Perform the following tasks using your Internet keyboard as 
needed:
Click the Pause button to pause play.
Click the Forward and Back buttons to skip tracks.
Click the Stop button to stop playing the CD.
Press the Eject button on the drive to remove the disc.
A CD-ROM drive reads 
CDs, CD-R, and CD-RW 
media. A DVD-ROM drive 
reads all CD media, plus 
DVD discs.
When you have finished 
listening to the CD, store 
the disc in the storage 
compartment on the front 
of your computer or in its 
protective case.
To adjust the volume, refer to 
Adjusting the Volume in this 
chapter.
If the CD-ROM, CD-RW, or 
DVD-ROM drive can’t play a 
disc, check to be sure that the 
disc is inserted with the label 
face-up and properly seated in 
the drive. The DVD-ROM 
drive takes longer to begin 
playback because it has to 
determine the type of media 
being played.
See also ...
Did you know ...