Compaq S0000 / 8000 Manual De Usuario

setting up your pc    

To connect the cable between the modem and the telephone service line: 

1 Plug one end of a modem cable (D) into the modem connector (A) on the back 

of the PC (C). This connector may be labeled with either Line or a modem 
connector symbol. 

2 Plug the other end of the cable (D) into the telephone service line jack (E) on 

the wall. 

You can also connect a telephone (F) to the other connector (B) on the modem 
(select models only). By connecting a telephone to the modem, you can make 
regular (voice) telephone calls when you are not using the modem — even if the 
PC is turned off. 

Your modem driver can be upgraded to enable certain V.92 features. For 
information, go to the Support Web site listed in the Warranty & Support Guide,
click the support link, type modem upgrade into the Search box, and then click the 
arrow to the right of the box. Follow the instructions provided. 

 Your ISP must support the V.92 standard to use any of the V.92 features.  

The Ethernet connection (may be called a network interface adapter, a Network 
Interface Card, or NIC) provides a high-speed, or broadband, connection to an 
Ethernet (10BaseT) or Fast Ethernet (100BaseT) network. After this interface is 
connected to a network such as a LAN (local area network), you can connect to 
the Internet through the LAN. This network connection also allows you to share 
printers, data, and other devices among your PCs. 

 Your PC may not come with an Ethernet connector. 

Locate the Ethernet connector (a RJ-45 port) on the back of the PC. 

A Ethernet connector 

(RJ-45 port) 

B Ethernet indicator 

lights