Compaq W4000 Manual De Usuario
Chapter 5 Input/Output Interfaces
5.9.5 NIC CONNECTOR
Figure 5-15 shows the RJ-45 connector used for the NIC interface. This connector includes the
two status LEDs as part of the connector assembly.
two status LEDs as part of the connector assembly.
Activity LED
Speed LED
Pin Description
1 Transmit+
2 Transmit-
3 Receive+
6 Receive-
1 Transmit+
2 Transmit-
3 Receive+
6 Receive-
5
6
7
8
3
4
2
1
Figure 5-14. Ethernet TPE Connector (RJ-45, viewed from card edge)
5.9.6 NIC SPECIFICATIONS
Table 5–27. 82559 NIC Operating Specifications
Table 5-27.
NIC Specifications
Parameter
Modes Supported
10BASE-T half duplex @ 10 MB/s
10Base-T full duplex @ 20 MB/s
100BASE-TX half duplex @ 100 MB/s
100Base-TX full duplex @ 200 MB/s
10Base-T full duplex @ 20 MB/s
100BASE-TX half duplex @ 100 MB/s
100Base-TX full duplex @ 200 MB/s
Standards Compliance
IEEE 802.2
IEEE 802.3 & 802.3u
IEEE Intel priority packet (801.1p)
IEEE 802.3 & 802.3u
IEEE Intel priority packet (801.1p)
OS Driver Support
MS-DOS
MS Windows 3.1
MS Windows 95 (pre-OSR2), 98, and 2000
Professional
MS Windows NT 3.51 & 4.0
Novell Netware 3.x, 4.x, 5x
Novell Netware/IntraNetWare
SCO UnixWare 7
OpenServer
MS Windows 3.1
MS Windows 95 (pre-OSR2), 98, and 2000
Professional
MS Windows NT 3.51 & 4.0
Novell Netware 3.x, 4.x, 5x
Novell Netware/IntraNetWare
SCO UnixWare 7
OpenServer
Boot ROM Support
Intel PRO/100 Boot Agent (PXE 3.0, RPL)
F12 BIOS Support
Yes
Bus Inteface
PCI 2.2
Power Management Support
APM, ACPI, PCI Power Management Spec.
5-36 Compaq Evo and Workstation Personal Computers
Featuring the Intel Pentium 4 Processor
Featuring the Intel Pentium 4 Processor
Second Edition – January 2003