Leica TPS400 Manual De Usuario
TPS400 Mining Manual-1.0.0en
Setting out
27
Setting out
This program calculates the
required elements to stakeout
points from coordinates or
manualy entered angles,
horizontal distances and
heights. Setting out differences
can be displayed continuously.
required elements to stakeout
points from coordinates or
manualy entered angles,
horizontal distances and
heights. Setting out differences
can be displayed continuously.
Setting out coordinates from
memory
Procedure:
memory
Procedure:
Select the point.
[DIST]
Starts measurement
and calculation of
the stake-out
elements.
and calculation of
the stake-out
elements.
[REC]
Saves the displayed
values.
values.
[B&D]
Input direction and
Hz-distance of stake
out point.
Hz-distance of stake
out point.
[MANUAL] Enables simplified
input of a point
without ptID and
without the
possibility of storing
the data of the point.
without ptID and
without the
possibility of storing
the data of the point.
Normal indication of polar setout
offsets dHz, dHD, ddH.
offsets dHz, dHD, ddH.
dHz:
Angle offset: positive
if point to be set-out
is to the right of the
actual direction.
if point to be set-out
is to the right of the
actual direction.
dHD:
Longitudinal offset:
positive if point to be
setout is further
away.
positive if point to be
setout is further
away.
ddH:
Height offset:
positive if point to be
setout is higher than
measured point.
positive if point to be
setout is higher than
measured point.
Polar setout