Graco 3A0415D Manual De Usuario

1. Install new battery pack in drive unit in the 

direction of the arrows as shown in F

NOTE: Only replace the battery  pack with a 
Graco battery  pack for EM Drive Lubricators, 
part number 124261. Handle and dispose of 
the battery  pack properly.

2. If a different size lubrication canister or dis-

charge period is going to be used, change 
dip switches to reflect the new canister size 
and/or time change. See Table 1, page 8.

3. Prime the grease line and all accessories 

with the same grease that is contained in 
the lubricator (See Parts, page 16 for a 
complete list of available grease car-
tridges).

4. Install reducers, extensions, grease line, 

etc. (if necessary).

5. Place drive unit on top of new lubrication 

canister until the teeth of both pieces are 
locked.

6. Screw the cover of the drive unit onto the 

lubrication canister - hand tighten only.

7. Remove the plug (A).

8. Install lubricator unit 

into adapter (B).

9. Screw lubricator into 

the lubrication point - 
hand tighten only.

10. To begin the discharge refer to Operation, 

Sparking can occur when changing the bat-
tery  pack. Only replace the battery pack in a 
non-hazardous location, away from flammable 
fluids or fumes.

Direction Arrow

To ensure optimal lubrication:

•

Seal threads of all connecting parts with a 
suitable, standard sealant. 

•

Mount oil filled lubricators properly with the 
outlet pointing down.

•

Never screw in the lubricator a second time 
or the self-sealing threads will be dam-
aged.

•

For remote mounting installations, make 
sure bracket does not squeeze the lubrica-
tion canister as this could block the piston 
inside the canister.

A

B