ADC 3 Manual De Usuario

Cuda 12000 IP Access Switch CLI-based Administration Guide

Configuring Static Routes

279

Perform the following tasks to add a static route to the routing table:

Example

cli:192.168.208.3:root# interface 1/11/1

mode: interface:ethernet:csi(1/11/1)

cli:192.168.208.3:interface:ethernet:csi(1/11/1)# ip route 222.2.1.0

255.255.255.0 222.2.2.1

cli:192.168.208.3:interface:ethernet:csi(1/11/1)# show ip

row count: 8

Protocol Route Destination Net Mask Next Hop Metric C/S/I

Type

-------- ------ --------------- --------------- --------------- ------ ------

Local Local 155.144.1.0 255.255.255.0 155.144.1.1 0 1/8/1

Local Local 199.3.1.0 255.255.255.0 199.3.1.1 0 131/1/1

Net Mgmt Remote 199.3.2.0 255.255.255.0 199.3.1.3 1 131/1/1

Local Local 201.1.1.0 255.255.255.0 201.1.1.1 0 1/1/1

Local Local 201.1.2.0 255.255.255.0 201.1.2.1 0 1/1/1

Net Mgmt Remote 222.2.1.0 255.255.255.0 222.2.2.1 1 1/11/1

Local Local 222.2.2.0 255.255.255.0 222.2.2.2 0 1/11/1

Net Mgmt Remote 222.2.3.0 255.255.255.0 222.2.2.1 1 1/11/1

Task

Command

1. Enter configuration mode for the

interface on which you want to
add the route.

interface {<c/s/i> | loopback}

2. Add the static route.

ip route <dest-network> <mask>
<gateway-ip-address> [<metric>]