HP (Hewlett-Packard) ZE5600 Manual De Usuario

 

Service Manual 

Removal and Replacement 

2-43 

3. Disconnect the 2 fan cables from the motherboard. 

4. Remove the 4 retaining M2.0×5.0mm screws in the “1,” “2,” “3,” “4” sequence stamped on the  

heat sink. 

5. Lift up on the heat sink (with fan). 

 

HP Pavilion ze5x00,  

HP nx9010 and HP nx9008, and  

Compaq Presario 2500 Models 

 

CAUTION: Do not spin the fan blades with your finger or you could damage the fan’s bearings. 

 

•  If the thermal pad is damaged, use a sharp knife or scraper to carefully remove it from the heat sink, and 

then attach a new thermal pad. 

•  Install the heat sink screws in this order: 

1.  Install all 4 screws lightly. 

2.  Fully tighten the screws in the order stamped on the heat sink.