Infocus IN3916 Manual De Usuario

Use LiteBoard

TM

Enabling interactivity on your projector

1

 

 

Charge the wand's battery. Connect the USB power 
adapter to an electrical outlet, then connect a USB cable 
between the adapter and the wand. Unplug the cable 
when the battery light turns off.

2

 

 

Connect the computer and projector with USB. Connect 
the other USB cable between your computer and the 
projector's USB Display connector.

3

 

 

Turn on the wand. Press the wand's tip, or press its L or R 
button. Use the wand to navigate your digital desktop.

To move: Point the wand at the screen.
To click: Push the wand's tip onto the screen or click the L 
button.

 The wand won't work if its tip is in a shadow, or 

if it is pointing at a shadow.

Lithium battery caution: The LiteBoard wand lithium battery is only  
rechargeable, and is not user serviceable or user replaceable. Always use the 
included USB cable and power adapter (or your computer) to charge the wand.

Turn off the projector

Download it at 

www.infocus.com/support

The Reference Guide is available in multiple languages. It covers advanced setup and 

operation, including lamp replacement instructions.

Press the power button

The power light on the projector will blink while the fan cools 
the lamp. If you need to unplug the projector, wait until the 
fan stops and the power light stops blinking and stays on. 

Note: While the power light is blinking, button presses on the 
projector and remote are ignored.

Use the microphone

Connect a microphone

Use a 3.5 mm mini-jack cable to connect a dynamic microphone 
to the projecter's microphone port.
There are two ways to adjust the microphone volume. You 
can either go to the Setup > Mic Volume menu and adjust the 
microphone volume, or press the Volume key on the projector  
to adjust the volume of the microphone and the projector. 

USB A

USB mini B

USB A

USB mini B