Cabletron Systems 7C04-R Manual De Usuario

Using the 7C0x SmartSwitch Hub View

2-24

Monitoring Hub Performance

Displays the actual operational status of the 7C0x’s SecureFast switching services: 
Enabled

, Disabled, Pending Enable (start-up in progress), Pending Disable 

(shut-down in progress), or Invalid Configuration. Note that the actual 
operational status may not always match the requested administrative status 
described above.

Displays the maximum number entries allowed in the Connection Table. Up to 
16000 entries can be stored in the SmartSwitch’s Connection Table.

Displays the number of entries currently stored in the Connection Table.

For devices which have been configured to operate in traditional bridging mode, 
you can use the Source Addresses option available from the Bridge Port menu to 
view a list of all the MAC addresses that are communicating through a selected 
bridge interface.

To open the Source Addresses window:

1.

If necessary, put the Hub View into the Bridge Application Display mode (click 
either mouse button on the Module Index or Module Type box to display the 
Module menu, drag down to Application Display, then across to select 
Bridge).

2.

Click mouse button 3 on the Port Index or Port Status display for the bridge 
port whose source address list you wish to view; drag down to Source 
Address, and release. The Source Address window, 

, will appear.