Cabletron Systems HSIM-A6DP- Manual De Usuario

Chapter 3: Local Management

ELAN Name (Modifiable)

This field is used to enter the name of the discovery ELAN that the 
HSIM-A6DP will join, when the discovery ELAN becomes enabled. 

Mode (Toggle)

This field toggles between “Master” and “Slave”. This field currently does 
not have any effect on the discovery ELAN, and any saved changes will 
not affect network performance. 

Status (Toggle)

This field toggles between Enabled and Disabled. The Status field is 
used to direct the HSIM-A6DP to either join the specified discovery 
ELAN (Enabled), or disconnect from the specified discovery ELAN 
(Disabled).

This command saves all changes to memory.

This command opens the previous screen of discovery ELANs. To 
perform the command, use the arrow keys to highlight the PREV 
command and press ENTER. The previous screen of discovery ELANs 
displays.

This command opens the next screen of discovery ELANs. To perform 
the command, use the arrow keys to highlight the NEXT command and 
press ENTER. The next screen of discovery ELANs displays.

To assign the HSIM-A6DP to an ELAN, perform the following steps:

Use the arrow keys to highlight the ELAN Name field.

Enter the name of the ELAN to which the HSIM-A6DP will connect.

The name entered in the ELAN Name filed MUST be a valid 
name of an ELAN that is already active on the network if the 
Status field will be set to Enabled.