Cabletron Systems HSIM-A6DP- Manual De Usuario

Chapter 3: Local Management

DELETE (Command)

This command appears only if a valid VCI has been entered in the VCI 
field of the Add/Delete Entry screen. This command deletes the PVC 
from the HSIM-A6DP connection table.

To add an entry (PVC), perform the following steps:

Use the arrow keys to highlight the IF field and enter the MIB-II 
interface number to which the PVC will be added. If a new MIB-II 
interface will be used for the PVC, this field can be left at “0”. The 
HSIM-A6DP will automatically use the next available interface for 
this PVC.

Use the arrow keys to highlight the VPI field and enter 0 or 1.

Use the arrow keys to highlight the VCI field and enter a VCI value 
from 32–1020.

Use the arrow keys to highlight the Encapsulation Type field and 
press the SPACE bar until the desired Encapsulation Type appears.

Use the arrow keys to highlight the BW (Mbps) field. Enter the total 
amount of available bandwidth that you wish to allocate to this PVC.

Use the arrow keys to highlight the ADD/MODIFY command.

Press ENTER. The “ENTRY ADDED” message appears at the top of 
the screen indicating that Local Management has added the PVC.

The VCI values 0 through 31 are reserved for ATM Forum use 
only.

The HSIM-A6DP will not allow any PVCs to be created if the 
desired bandwidth entered in the BW (Mbps) field exceeds the 
available bandwidth of the APIM.