Cabletron Systems ELS10-26TX Manual De Usuario

3-8

Configuring Your ELS10-26

Each set of connections between two ELS10-26s is called a Trunk 
Group. You can create two Trunk Groups, each having up to eight 
ports, to interconnect your ELS10-26s. 

For example, if you have three ELS10-26s (A, B, and C), as shown 
in Figure 3-2, you could connect them using a single Ethernet 
segment. However, that would limit the interconnection to             
10 Mbps. To solve this problem, you could connect A to B with one 
Trunk Group, and connect B to C with a second Trunk Group.