Cabletron Systems ELS10-26TX Manual De Usuario

3-22

Configuring Your ELS10-26

The set community name variable (

lxadminAnyPass

) and get 

community name variable (

lxadminGetPass

) must be set to the value 

of the community name used by the SNMP manager for 
performing either set or get operations. A zero length community 
name means that any community name is acceptable.

lxadminAnyPass - {lxadmin 2}

DisplayString (SIZE (0..24))

lxadminGetPass - {lxadmin 2}

DisplayString (SIZE (0..24))

Dynamic (learned) addresses are automatically deleted from the 
ELS10-26 Bridge Address Table after a certain length of time. The 
aging time default is five minutes, as set by the IEEE 802.1d 
standard. However, you can change the aging parameter with the 
MIB variable 

dot1dTpAgingTime

.

The ELS10-26 continually compares the actual age of each dynamic 
address against the age specified by the 

dot1dTpAgingTime

 

parameter, and deletes any addresses that are older than the age 
specified (or older than five minutes if you are using the default). 
Typically, there is no need to set the aging time to a very small 
number because the ELS10-26 Bridge Address Table supports 979 
addresses.