IBM RS/6000 SP Manual De Usuario
– 01 - 99 for frames 1-99 (specific to that frame)
Notes:
1. E01 designates RS/6000 SP physical frame 1
2. L00 designates any/all RS/6000 SP logical frames
3. S00 designates any/all RS/6000 SP multi-switch frames
4. For locations inside a frame, the Frame (WWW) and/or Major Assembly (XXX) strings may be omitted,
making the format YY-ZZZ
Major assembly (XXX)
v
1st character is the major assembly type (all three characters if the assembly occurs only once in a
frame):
frame):
– N for processor node assembly
– S for switch assembly
– PDU for power distribution unit assembly
– ADC for ac/dc Converter assembly
– FRA for frame
v
2nd and 3rd characters are the major assembly number:
– 00 for any/all major assemblies (designates location inside any/all major assemblies)
– 01 - 99 for major assembly 1-99 (specific to that major assembly)
Sub-assembly (YY)
1st and 2nd characters are the assembly designation inside the major assembly. (This string may be
omitted in some cases.)
omitted in some cases.)
Refer to the lists of two-character designations associated with each major assembly throughout this
chapter.
chapter.
Example:
SC
denotes a switch card.
Connection location (ZZZZ)
v
1st character is the connection type:
– P for plug (cable side)
– J for jack (card/component side)
– G for chassis ground connection
v
2nd, 3rd, and 4th characters are number identifiers. Leading zeroes may be omitted.
Example:
P102
is plug 102
Examples for using complete levels of nomenclature
To describe the jack 23 on the switch assembly bulkhead in the second RS/6000 SP frame in a four-frame
configuration, designate as:
configuration, designate as:
E02-S01-BH-J23
To describe plug 1 on the power card of the any switch assembly of any RS/6000 SP frame in any size
system configuration, designate as:
system configuration, designate as:
E00-S00-PC-P1 or just PC-P1
Location diagrams of the RS/6000 SP components
See Figure 2-1 on page 2-3, Figure 2-2 on page 2-4, and Figure 2-4 on page 2-6, in the pages that follow,
for views of the RS/6000 SP frame locations. Refer to the diagrams included in this section for specific
views and cabling of the main component sections in the RS/6000 SP frame.
for views of the RS/6000 SP frame locations. Refer to the diagrams included in this section for specific
views and cabling of the main component sections in the RS/6000 SP frame.
2-2
RS/6000 SP: SP Switch Service Guide