Cabletron Systems 04-0053-01 Manual De Usuario
SmartSwitch ATM User Guide 5-3
Virtual Ports and Static Connections
PVC Connections
Example: Create a point-to-multipoint connection between a broadcasting workstation on port
7a1
and three other
workstations connected to ports
7a2
,
7a3
, and
7a4
.
1.
Use
add trafficdescriptor
to create two new traffic descriptors, one for the forward direction, the
other for the backward direction. For this example, for the forward traffic descriptor, we select UBR
and accept the defaults.
and accept the defaults.
SmartSwitch # add trafficdescriptor
— This is the forward descriptor
TrafficType(UBR) :
— We use UBR for this example
TrafficDescriptorType(11) :
PCRCLP01(100) :
— Take the default values
QOSCLASS(0) :
AalType(5) :
SmartSwitch #
However, on a point-to-multipoint connection there should be no traffic in the backward direction, so we define the
backward traffic descriptor with its Cell Loss Priorities set to zero (0)
backward traffic descriptor with its Cell Loss Priorities set to zero (0)
SmartSwitch # add trafficdescriptor
TrafficType(UBR) :
— This is the backward traffic descriptor
TrafficDescriptorType(11) :
PCRCLP01(100) : 0
— Set PCRCLP01 to zero
QOSCLASS(0) :
AalType(5) :
SmartSwitch #
2.
Use
show trafficdescriptor
to obtain the new traffic descriptors’ index numbers.
SmartSwitch # show trafficdescriptor
========================================================================================
TD# Traff Desc QoS Peak Cell Rate Sust Cell Rate Max Burst Size Min Cell Aal Type
Type Type (Kb/s) (Kb/s) (Kb/s) Rate
CLP_0 CLP_0+1 CLP_0 CLP_0+1 CLP_0 CLP_0+1 (Kb/s)
=========================================================================================
1 NRTVBR 7 0 0 10872 5436 0 2052 0 0 5
2 CBR 2 1 0 100 0 0 0 0 0 5
3 UBR 11 0 0 100 0 0 0 0 0 5
4 UBR 11 0 0 0 0 0 0 0 0 5
176 NRTVBR 2 1 0 1585 0 0 0 0 0 5
SmartSwitch #
In the example above, traffic descriptor three (3) will be used in the forward direction, and traffic descriptor four (4)
will be used in the backward direction.
will be used in the backward direction.
3.
Use
add pvc
to successively create point-to-multipoint PVCs for ports
7a2
,
7a3
, and
7a4
.
SmartSwitch # add pvc
ConnType(PTP) : pmp
Port-1-Number() : 7a1
Port-1-VPCI() : 0
Port-1-VCI() : 101
Port-2-Number() : 7a2
Port-2-VPCI() : 0
Port-2-VCI() : 101
Port1-to-Port2TrafficDescriptorIndex() : 3
Port2-to-Port1TrafficDescriptorIndex() : 4
SmartSwitch #
4.
Perform step 3 for ports
7a3
and
7a4
.