Cabletron Systems 1088 Manual De Usuario

C o n f i g u r a t i o n V i e w s

A T M C l i e n t C o n f i g u r a t i o n V i e w

S p e c t r u m E n t e r p r i s e M a n a g e r

Page 53

S m a r t S w i t c h 6 0 0 0

The maximum number of active VCI bits 
configured for use at this ATM interface.

The VPI value of the VCC supporting the ILMI at 
this ATM interface. If the values of both ILMI VPI 
and ILMI VCI equal 0, then the ILMI is not 
supported for this ATM interface.

The VCI value of the VCC supporting the ILMI at 
this ATM interface. If the values of both ILMI VPI 
and ILMI VCI equal 0, then the ILMI is not 
supported for this ATM interface.

The type of primary ATM address configured for 
use at this ATM interface.

The address assigned for administrative 
purposes. If this interface has no assigned 
administrative address or if the address used for

administrative purposes is the same as that used 
for the physical address, then this is an octet 
string of zero length.

The IP address of the neighbor system connected 
to the far end of this interface to which a Network 

Management Station can send SNMP messages as 
IP datagrams to UDP port 161 in order to access 
network management information concerning the 
operation of that system. 

The name of the interface on the neighbor system 
at the far end of this interface, and to which this 
interface connects. If the neighbor system is 
manageable through SNMP and supports the 
object ifName, the value of this object must be 
identical to that of the ifName for the ifEntry of 
the lowest level physical interface for this port. If 
this interface does not have a name, the value of 
this object is a zero length string.