IBM LE-565 Manual De Usuario

The board supports two Serial ATA ports onboard, and supports RAID 0, 1 and JBOD disk 

array, the RAID 0, 1 and JBOD are specified below: 

RAID 0 (Stripping): Two hard drives operating as one drive for optimized data R/W 

performance. It needs two unused drives to build this operation. 

RAID 1 (Mirroring): Copies the data from first drive to second drive for data security, and if 

one drive fails, the system would access the applications to the workable drive. It needs two 

unused drives or one used and one unused drive to build this operation. The second drive 

must be the same or lager size than first one. 

JBOD (Span): As different as RAID 0, the JBOD combines two disks as one without any 

fault tolerance and I/O performance enhancement. 

To build Serial ATA disk array, please press <TAB> while booting up the system before 

entering OS, and follow the instructions to edit the RAID function.