Cabletron Systems 1800 Manual De Usuario

Speed Dial Configuration

12-7

SmartSwitch 1800 Voice Configuration

Valid values for the voice concentrator vary depending on the device type; the 
numbers below relate to ACT NetworksÕ SDM network access devices.

Digits 1-2= Switch number 01-61.

Digits 3-4= Port number 00-15.

Digit 5= Slot number 1-8 if FP or DX. Slot number 1-4 if JFP.

Digit 6= Channel number 0-5 if DVC. Arbitrary (typically 1-6) if FP or JFP.

This is an extended set of digits that will be forwarded with the call if Ext. Digits 
Source

 is set to Map in the Voice ConÞguration window (see 

). If Ext. Digits Source is set to User, any extended digits must be 

entered by the operator at the initiating device.

Calls placed to a speed-dial number will go to the device (e.g., PBX) whose full 
number is associated with that speed-dial number in the Voice Speed Dial 
ConÞguration window. If extended dial digits are included in the table or the call, 
the call will automatically be forwarded through the remote device to the 
telephone number that matches the extended digits.

First, access the Voice Speed Dial ConÞguration Window (see 

).

To add a new Speed Dial Number:

1.

Enter the configurable values for each number.

2.

Click on 

 to add your new entry.

To modify an existing entry:

1.

In the list box, click to select the number you wish to modify. The selected 
entry will be highlighted. (Note that you can only modify one entry at a time.)

2.

Edit the fields, as desired. If you make some changes, and would like to return 
to the original values, click on the Refresh button.

3.

Click on 

 to modify the selected entry.

To delete an existing entry:

1.

In the list box, click to select the number you wish to delete. The selected 
entry will be highlighted. (Note that you can only delete one entry at a time.)

2.

Click on 

 to delete the selected entry.