Cabletron Systems 100 Manual De Usuario

Descargar
Página de 110
3-22
Configuring Your ELS100-16TX
Set Community Name
The set community name variable (
kxadminAnyPass
) and get 
community name variable (
kxadminGetPass
) must be set to the value 
of the community name used by the SNMP manager for 
performing either set or get operations. A zero length community 
name means that any community name is acceptable.
kxadminAnyPass - {kxadmin 2}
DisplayString (SIZE (0..24))
kxadminGetPass - {kxadmin 2}
DisplayString (SIZE (0..24))
3.16.3  Aging Parameter
Dynamic (learned) addresses are automatically deleted from the 
ELS100-16TX Bridge Address Table after a certain length of time. 
The aging time default is five minutes, as set by the IEEE 802.1d 
standard. However, you can change the aging parameter with the 
MIB variable 
dot1dTpAgingTime
.
The ELS100-16TX continually compares the actual age of each 
dynamic address against the age specified by the 
dot1dTpAgingTime
 
parameter, and deletes any addresses that are older than the age 
specified (or older than five minutes if you are using the default). 
Typically, there is no need to set the aging time to a very small 
number because the ELS100-16TX Bridge Address Table supports 
8192 addresses.