Cabletron Systems 6E132-25 Manual De Usuario

Descargar
Página de 184
6E122-26, 6E132-25, 6E123-26 and 6E133-25 User’s Guide
5-1
CHAPTER 5
LOCAL MANAGEMENT
This chapter explains how to set up a management terminal to access 
6E12X-26 and 6E13X-25 Local Management. It also explains how to use 
the Local Management screens and commands.
5.1
OVERVIEW
Local Management for the 6E12X-26 and 6E13X-25 consists of a series 
of management screens that allow the management of the module, the 
attached segments and the 6C105 chassis. The management screens allow 
the user to perform the following tasks:
Manage any interface module in the chassis via a connection to a 
single interface module.
Assign IP addresses and subnet masks to the 6E12X-26, 6E13X-25 
and the 6C105 chassis.
Control access to the 6E12X-26, 6E13X-25 and the 6C105 chassis by 
establishing community names.
Download a new image of operating software.
Designate which Network Management Workstations receive SNMP 
traps from the 6E12X-26, 6E13X-25 and the 6C105 chassis.
Monitor the environmental status of the 6C105 chassis.
View switch, interface, and RMON statistics.
Assign ports to operate in standard or full duplex mode.
Enable trunking of ports to perform load sharing.
Configure the Fast Ethernet Interface Modules of the 6E12X-26 and 
the HSIM of the 6E13X-25.
NOTE
The Local Management screens shown in this chapter are for 
the 6E122-26. The 6E132-25, 6E133-25 and 6E123-26 share 
most of the following Local Management screens. All Local 
Management functions specific to any of the interface modules 
are preceded by a Note to alert the reader.