Cabletron Systems 3T02-04 Manual De Usuario

Once you have received your ATX, you may want to add a new module to 
expand your network bandwidth, replace a module with a module of a 
different type, or swap a module with another module of the same type. If 
you are:

•

Adding a module to a previously vacant slot or to a slot that had a 
different type of module, refer to the section Adding a Token Ring 
Switch Module below, for instructions.

•

Replacing a Token Ring module, refer to Section 6.3, Swapping a 
Module, for instructions.

Before adding or swapping modules, refer to the latest version of the ATX 
Release Notes (provided with your ATX software) for information about 
software and hardware version numbers and compatibility.

Unpack the module carefully, handling it by the edges only, and inspect it 
for possible damage. If any damage is evident, contact Cabletron Systems 
Technical Support immediately. Save the original container and antistatic 
wrap in case the module needs to be repaired.

If the module you are adding is of a different type than the module that 
previously occupied that slot, or if the slot was previously vacant, you 
have to reboot the ATX so it will recognize the new module.