KTI Networks KCD-303P-A1 Manual De Usuario

Depending on the model specified, two different sizes of POF cables are supported. One is 1.5mm and 

the other is 2.2mm in diameter. The following figure illustrates 2.2mm POF and Cat.5 as comparison. 

 

The design of the device enables the POF to be cut and terminated to the exact required length on site, 

allowing even the most novice user to quickly and easily terminate the bare POF fiber. To terminate 

the POF cable into OptoLock

TM

   

connector, the end of the cable is cut cleanly, and the two strands are 

separated. One strand is inserted into each of two holes in the termination housing, which is then 

pressed closed to hold the POF in place. 

 

 

Identify TX and RX holes on OptoLock

TM

   

connector before making cable connection. 

 

 

16/18