Juniper Networks EX8208 Manual De Usuario
an EX8208 Switch from a Rack or Cabinet Using a Mechanical Lift” on page 202. If a
mechanical lift is not available, remove all components and manually lift the empty
chassis out of the rack. For instructions on removing the chassis without using a
mechanical lift, see “Removing an EX8208 Switch from a Rack or Cabinet Without
Using a Mechanical Lift” on page 203.
mechanical lift is not available, remove all components and manually lift the empty
chassis out of the rack. For instructions on removing the chassis without using a
mechanical lift, see “Removing an EX8208 Switch from a Rack or Cabinet Without
Using a Mechanical Lift” on page 203.
Related Topics
•
•
Removing an EX8208 Switch from a Rack or Cabinet Using a Mechanical Lift
Because of the switch's size and weight, we strongly recommend using a mechanical lift
to remove the switch. For instructions on removing a switch without using a mechanical
lift, see “Removing an EX8208 Switch from a Rack or Cabinet Without Using a Mechanical
Lift” on page 203.
to remove the switch. For instructions on removing a switch without using a mechanical
lift, see “Removing an EX8208 Switch from a Rack or Cabinet Without Using a Mechanical
Lift” on page 203.
Before you remove the switch using a lift:
•
Ensure that the rack or cabinet is stable and secured to the building.
•
Ensure that there is enough space to place the removed switch in its new location and
along the path to the new location.
along the path to the new location.
•
Read “General Safety Guidelines and Warnings for EX Series Switches” on page 263,
with particular attention to “Chassis Lifting Guidelines for EX8200 Switches” on page 276.
with particular attention to “Chassis Lifting Guidelines for EX8200 Switches” on page 276.
•
Ensure that the switch has been safely powered off (see “Powering Off an EX8200
Switch” on page 199) and that you have unplugged (disconnected) the power cords to
the power supplies.
Switch” on page 199) and that you have unplugged (disconnected) the power cords to
the power supplies.
•
Ensure that you have disconnected any cables or wires attached to the switch ports.
CAUTION: When removing more than one switch from a rack or cabinet, remove the
switch in the top of the rack or cabinet first and proceed to remove the rest of the
switches from top to bottom.
switch in the top of the rack or cabinet first and proceed to remove the rest of the
switches from top to bottom.
Ensure that you have the following parts and tools available to remove the switch:
•
A mechanical lift
•
A Phillips (+) screwdriver, number 2 or number 3, depending on the size of your rack
mounting screws
mounting screws
Copyright © 2010, Juniper Networks, Inc.
202
Complete Hardware Guide for EX8208 Ethernet Switches