Juniper Networks EX8208 Manual De Usuario
Figure 85: Removing an SRE Module from an EX8208 Switch
Related Topics
•
•
Taking the SF Module Offline in an EX8208 Switch
The SF module provides switching functionality for an EX8208 switch. Your switch can
have either zero SF modules or one SF module.
have either zero SF modules or one SF module.
NOTE: If you take the SF module offline in a switch configuration having only one Switch
Fabric and Routing Engine (SRE) module, throughput will be low.
Fabric and Routing Engine (SRE) module, throughput will be low.
To take the SF module offline:
1.
Take the SF module offline:
user@switch> request chassis cb offline slot 2
For an SF module, the control board slot number is always
2
.
2.
(Optional) Confirm that the SF module is offline:
user@switch> show chassis environment cb slot-number
The state field in the command output shows that the SF module is offline. It is now
safe to remove or replace the SF module.
safe to remove or replace the SF module.
Related Topics
•
Copyright © 2010, Juniper Networks, Inc.
216
Complete Hardware Guide for EX8208 Ethernet Switches