Lantronix XSENSO 21R2 Manual De Usuario
18: Advanced Settings
xSenso User Guide
104
Using the CLI
To enter Email command level: enable -> email 1
Using XML
Include in your file: <configgroup name=”email” instance=”1”>
Command Line Interface Settings
The Command Line Interface settings allow you to control how users connect to and interact with
the xSenso's command line. It is possible to configure access via the Telnet and SSH protocols, in
addition to general CLI options.
the xSenso's command line. It is possible to configure access via the Telnet and SSH protocols, in
addition to general CLI options.
Basic CLI Settings
The basic CLI settings control general CLI access and usability options.
Table 18-2 CLI Configuration Settings
To View and Configure Basic CLI Settings
Using Web Manager
To view CLI statistics, go to the Admin tab/page,
click CLI in the menu and select Statistics.
To configure basic CLI settings, go to the Admin tab/page,
click CLI in the menu and select
Configuration.
Using the CLI
To enter CLI command level: enable -> config -> cli
Using XML
Include in your file: <configgroup name=”cli”>
Command Line Interface
Configuration Settings
Configuration Settings
Description
Login Password
Enter the password for logins by the admin account. The default password is
“PASS”.
“PASS”.
Enable Level Password
Enter the password for access to the Command Mode Enable level. There is
no password by default.
no password by default.
Quit Connect Line
Enter the Quit Connect Line string to be used to terminate a telnet or SSH
session and resume the CLI. Type <control> before the key to be pressed
while holding down the [Ctrl] key (example: <control>L)
session and resume the CLI. Type <control> before the key to be pressed
while holding down the [Ctrl] key (example: <control>L)
Inactivity Timeout
Set a time period in which the CLI session should disconnect if no data is
received. Enter 0 to disable. Blank the display field to restore the default.
received. Enter 0 to disable. Blank the display field to restore the default.
Line Authentication
Enable or Disable authentication for CLI access on the USB Serial Gadget
Port.
Port.