Lantronix XSENSO 21R2 Manual De Usuario
xSenso User Guide
40
6:
Using DeviceInstaller
This chapter covers the steps for locating a xSenso unit and viewing its properties and device
details. DeviceInstaller is a free utility program provided by Lantronix that discovers, configures,
upgrades and manages Lantronix Device Servers.
details. DeviceInstaller is a free utility program provided by Lantronix that discovers, configures,
upgrades and manages Lantronix Device Servers.
Notes:
For instructions on using DeviceInstaller to configure the IP address and related
settings or for more advanced features, see the DeviceInstaller Online Help.
settings or for more advanced features, see the DeviceInstaller Online Help.
Auto IP generates a random IP address in the range of 169.254.0.1 to
169.254.255.254, with a netmask of 255.255.0.0, if no BOOTP or DHCP server is
found. These addresses are not routable.
169.254.255.254, with a netmask of 255.255.0.0, if no BOOTP or DHCP server is
found. These addresses are not routable.
Accessing xSenso Using DeviceInstaller
Note:
Make note of the MAC address. It is needed to locate the xSenso using
DeviceInstaller.
To use the DeviceInstaller utility, first install the latest version from the downloads page on the
Lantronix web site
Lantronix web site
www.lantronix.com/downloads
.
1.
Run the executable to start the installation process and respond to the installation wizard
prompts. (If prompted to select an installation type, select Typical.)
prompts. (If prompted to select an installation type, select Typical.)
2.
Click Start -> All Programs -> Lantronix -> DeviceInstaller 4.3 -> DeviceInstaller.
3.
When DeviceInstaller starts, it will perform a network device search. To perform another
search, click Search.
search, click Search.
4.
Expand the xSenso folder by clicking the + symbol next to the folder icon. The list of available
Lantronix xSenso devices appears.
Lantronix xSenso devices appears.
5.
Select the xSenso unit by expanding its entry and clicking on its IP address to view its
configuration.
configuration.
6.
On the right page, click the Device Details tab. The current xSenso configuration appears.
This is only a subset of the full configuration; the full configuration may be accessed via Web
Manager, CLI or XML.
This is only a subset of the full configuration; the full configuration may be accessed via Web
Manager, CLI or XML.
Device Detail Summary
Note:
The settings are Display Only in this table unless otherwise noted
Current Settings
Description
Name
Shows “xSenso 2100”, “xSenso 21A2” or “xSenso 21R2”.
DHCP Device Name
The name associated with the xSenso’s current IP address, if the IP
address was obtained dynamically.
address was obtained dynamically.