Lantronix XSENSO 21R2 Manual De Usuario



To configure RSS, go to the Admin tab/page and click RSS in the menu.



To enter the RSS command level:  enable -> config -> rss



Include in your file:  <configgroup name=”rss”>

Simple Network management Protocol (SNMP) settings may be viewed and configured in this 
section.

Click the button to clear RSS feed data.

Select to enable or disable the SNMP agent state.

Select the SNMP version used by the SNMP agent.

Specify the read community used by the agent (defaults to public community).

Specify the write community used by the agent (defaults to private community).

Show SNMPv3 Engine ID, if SNMPv3 version is selected.

Enter the SNMPv3 Username if SNMPv3 version and authentication are selected.

Select whether authentication and/or privacy should be used by the agent, if 
SNMPv3 version and authentication are selected.

Select which authentication protocol should be used by the agent, if SNMPv3 
version and authentication are selected. 

Enter the authentication password to be used by the agent, if SNMPv3 version and 
authentication are selected.  Must be at least eight (8) characters.

Select the privacy encryption method to be used by the agent, if SNMPv3, 
authentication and privacy are selected.

Enter the password to be used for privacy encryption by the agent, if SNMPv3 
version, authentication and privacy are selected.  Must be at least eight (8) 
characters.

Specify the system contact.

Update the system name, as necessary.  The default system name is xSenso 2100, 
xSenso 21A2 or xSenso 21R2, depending the xSenso model.