Cisco Systems N5KC5596TFA Manual De Usuario
Purpose
Command or Action
(Optional)
Saves the change persistently through reboots and restarts by
copying the running configuration to the startup configuration.
Saves the change persistently through reboots and restarts by
copying the running configuration to the startup configuration.
switch(config-if)# copy
running-config startup-config
running-config startup-config
Step 4
This example shows how to configure Ethernet interface 2/1 with a bandwidth value of 80000:
switch#
configure terminal
switch(config)#
interface ethernet 2/1
switch(config-if)#
bandwidth 80000
switch(config-if)#
copy running-config startup-config
Configuring a VLAN Interface
Procedure
Purpose
Command or Action
Enters global configuration mode.
switch# configure terminal
Step 1
Enables VLAN interface mode.
switch(config)# feature interface-vlan
Step 2
Creates a VLAN interface. The number range is
from 1 to 4094.
from 1 to 4094.
switch(config)# interface vlan number
Step 3
Configures an IP address for this interface.
switch(config-if)# [ip | ipv6 ] address
ip-address/length
ip-address/length
Step 4
(Optional)
Displays the VLAN interface statistics. The
number range is from 1 to 4094.
Displays the VLAN interface statistics. The
number range is from 1 to 4094.
switch(config-if)# show interface vlan
number
number
Step 5
(Optional)
Saves the change persistently through reboots and
restarts by copying the running configuration to
the startup configuration.
Saves the change persistently through reboots and
restarts by copying the running configuration to
the startup configuration.
switch(config-if)# copy running-config
startup-config
startup-config
Step 6
This example shows how to create a VLAN interface:
switch#
configure terminal
switch(config)#
feature interface-vlan
switch(config)#
interface vlan 10
switch(config-if)#
ip address 192.0.2.1/8
switch(config-if)#
copy running-config startup-config
Cisco Nexus 5000 Series NX-OS Interfaces Configuration Guide, Release 5.2(1)N1(1)
78-26881-OL
39
Configuring Layer 3 Interfaces
Configuring a VLAN Interface