Cisco Systems N5KC5596TFA Manual De Usuario

This example shows how to set the LACP-enabled interface to active port-channel mode for Ethernet interface
1/4 in channel group 5:

switch#

configure terminal

switch (config)#

interface ethernet 1/4

switch(config-if)#

channel-group 5 mode active

This example shows how to forcefully add an interface to the channel group 5:

switch(config)#

interface ethernet 1/1

switch(config-if)#

channel-group 5 force

switch(config-if)#

Configuring the LACP Fast Timer Rate

You can change the LACP timer rate to modify the duration of the LACP timeout. Use the lacp rate command
to set the rate at which LACP control packets are sent to an LACP-supported interface. You can change the
timeout rate from the default rate (30 seconds) to the fast rate (1 second). This command is supported only
on LACP-enabled interfaces.

Before You Begin

Ensure that you have enabled the LACP feature.

Procedure

Purpose

Command or Action

Enters configuration mode.

switch# configure terminal

Step 1

Specifies the interface to configure and enters the
interface configuration mode.

switch(config)# interface type slot/port

Step 2

Configures the fast rate (one second) at which LACP
control packets are sent to an LACP-supported
interface.

switch(config-if)# lacp rate fast

Step 3

This example shows how to configure the LACP fast rate on Ethernet interface 1/4:

switch#

configure terminal

switch (config)#

interface ethernet 1/4

switch(config-if)#

lacp rate fast

This example shows how to restore the LACP default rate (30 seconds) on Ethernet interface 1/4.

switch#

configure terminal

switch (config)#

interface ethernet 1/4

switch(config-if)#

no lacp rate fast

Cisco Nexus 5000 Series NX-OS Interfaces Configuration Guide, Release 5.2(1)N1(1)

78-26881-OL

Configuring Port Channels

Configuring the LACP Fast Timer Rate