Cisco Systems N7KF248XT25EP1 Manual De Usuario
S e n d d o c u m e n t c o m m e n t s t o n e x u s 7 k - d o c f e e d b a c k @ c i s c o . c o m
6-37
Cisco Nexus 7000 Series Hardware Installation and Reference Guide
OL-18634-01
Chapter 6 Managing the Device Hardware
EPLD Configuration
Fan:
------------------------------------------------------
Fan Model Hw Status
------------------------------------------------------
Fan1(sys_fan1) 0.0 Ok
Fan2(sys_fan2) 0.0 Ok
Fan3(fab_fan1) 0.0 Ok
Fan4(fab_fan2) 0.0 Ok
Fan_in_PS1 -- -- Ok
Fan_in_PS2 -- -- Ok
Fan_in_PS3 -- -- Ok
Fan Air Filter : Absent
switch#
Step 2
Upgrade the EPLD images for the fan tray module by entering the install fan-module slot_number epld
url command.
url command.
switch# install fan-module 1 epld bootflash:n7000-s1-epld.4.0.2.img
EPLD image file , built on Fri May 16 20:36:39 2008
EPLD Curr Ver New Ver
-------------------------------------------------------
Fan Controller 0.5 0.7
Fan Controller 0.5 0.7
WARNING: Upgrade process could upto 30 minutes.
Module could be powered down and up.
Programming Fan Module 1 !!
Do you want to continue (y/n) ? [n]
Step 3
Confirm the upgrade by entering Y for yes.
...
Do you want to continue (y/n) ? [n] y
To confirm the EPLD upgrade, see the
Displaying the EPLD Versions
These topics describe how to display the EPLD versions on each module in your system and display the
available EPLD versions:
available EPLD versions:
•
•
•
•
Displaying EPLD Versions for an I/O or Supervisor Module
To display all of the current EPLD versions on a specific I/O or supervisor module, use the show version
module slot_number epld command as shown in
module slot_number epld command as shown in
.