Cisco Systems WSC2960XR48FPDI Manual De Usuario
© 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 18
Feature
2960-XR
2960-X
2960-S
2960
Management options
Console RJ45, USB
console, and out of band
Ethernet
console, and out of band
Ethernet
Console RJ45, USB
console, and out of band
Ethernet
console, and out of band
Ethernet
Console RJ45, USB
console, and out of band
Ethernet
console, and out of band
Ethernet
Console RJ45
Flash
256 MB
128 MB
64 MB
32 MB
DRAM
512 MB
512 MB
256 MB
64 MB
Active VLANs
1K
1K
255
64
EtherChannel groups
48
24
6
6
Egress buffers
4 MB
4 MB
2 MB
2 MB
Switched Port Analyzer
(SPAN) sessions
(SPAN) sessions
4
4
2
2
Max MAC addresses
32K
*
16K
8K
8K
IPv4 unicast routes
24K
**
16 static
16 static
16 static
NetFlow-Lite
Yes
Yes
No
No
Hibernation Mode
Yes
Yes
No
No
EEE
Yes
Yes
No
No
*
vlan sdm template,
**
ipv4 sdm template,
***
redundancy is provided by second power supply.
Stacking
Q. What is Cisco FlexStack-Plus stacking?
A. Cisco FlexStack-Plus is a hot-swappable, modular stacking solution that provides a true stacking capability,
with all switches acting as a single switching unit with a unified data plane, using a single IP address. Cisco
FlexStack-Plus is supported by the Cisco Catalyst 2960-X Series and allows the stacking of up to eight
switches, with a throughput of 80 gigabits per second.
Q. What is difference between FlexStack and FlexStack-Plus technology?
A. The FlexStack-Plus technology is similar to FlexStack technology with the differences listed in Table 3.
Table 3.
Comparison Between FlexStack and FlexStack-Plus
Platform
Members
Bandwidth
Convergence
FlexStack
4
40 Gbps
1–2 sec
FlexStack-Plus
8
80 Gbps
100 msec
Q. What are the stackable models of the Cisco Catalyst 2960-X Series?
A. The LAN Base and IP Lite feature set models are stackable models in the Cisco Catalyst 2960-X Series.
The LAN Lite feature set model is a standalone model. Note: The fanless SKU (WS-C2960S-PSQ-L with Lan
Base) does not support stacking
Q. Can LAN Base and IP Lite feature set models stack together in the Cisco Catalyst 2960-X Series?
A. No, LAN Base and IP Lite feature set models cannot be stacked together. LAN Base feature set models can
stack with LAN Base feature set models only. Similarly, IP Lite feature set models can stack with IP Lite
feature set models only.
Q. Can Cisco Catalyst 2960-X switches stack with Cisco Catalyst 2960-XR switches?
A. No. Cisco Catalyst 2960-X and 2960-XR switches can’t stack together since they don’t share common feature
set model.