Cisco Systems WSC2960XR48FPSI Manual De Usuario

Configure interfaces to be isolated or community host ports, and assign VLAN membership to the host
port.

Configure interfaces as promiscuous ports, and map the promiscuous ports to the primary-secondary
VLAN pair.

If inter-VLAN routing will be used, configure the primary SVI, and map the secondary VLANs to the
primary.

Verify the private VLAN configuration.

Default Private VLAN Configuration

No private VLANs are configured.

How to Configure Private VLANs

Configuring and Associating VLANs in a Private VLAN

The private-vlan commands do not take effect until you exit VLAN configuration mode.

SUMMARY STEPS

1. configure terminal

2. vtp mode transparent

3. vlan vlan-id

4. private-vlan primary

5. exit

6. vlan vlan-id

7. private-vlan isolated

8. exit

9. vlan vlan-id

10. private-vlan community

11. exit

12. vlan vlan-id

13. private-vlan association [add | remove] secondary_vlan_list

14. end

15. show vlan private-vlan [type] or show interfaces status

16. copy running-config startup config

Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1

OL-29440-01

Configuring Private VLANs

Default Private VLAN Configuration