Cisco Systems WSC2960XR48FPSI Manual De Usuario
DETAILED STEPS
Purpose
Command or Action
Enters the global configuration mode.
configure terminal
Example:
Switch#
configure terminal
Step 1
Changes the retry count. The retry range is 1 to 10; the default
is 3.
is 3.
vmps retry count
Example:
Switch(config)#
vmps retry 5
Step 2
To return the switch to its default setting, use the no
vmps retry global configuration command.
vmps retry global configuration command.
Note
Returns to privileged EXEC mode.
end
Example:
Switch(config)#
end
Step 3
Verifies your entry in the Server Retry Count field of the
display.
display.
show vmps
Example:
Switch#
show vmps
Step 4
(Optional) Saves your entries in the configuration file.
copy running-config startup-config
Example:
Switch#
copy running-config startup-config
Step 5
Troubleshooting Dynamic-Access Port VLAN Membership
Problem
The VMPS shuts down a dynamic-access port under these conditions:
•
Problem
The VMPS is in secure mode, and it does not allow the host to connect to the port. The VMPS
shuts down the port to prevent the host from connecting to the network.
•
Problem
More than 20 active hosts reside on a dynamic-access port.
Solution
To reenable a disabled dynamic-access port, enter the shutdown interface configuration command
followed by the no shutdown interface configuration command.
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
116
OL-29440-01
Configuring VMPS
Troubleshooting Dynamic-Access Port VLAN Membership