Cisco Systems WSC2960XR48FPSI Manual De Usuario
Purpose
Command or Action
(Optional) Saves your entries in the configuration file.
copy running-config startup-config
Example:
Switch#
copy running-config startup-config
Step 10
Related Topics
IEEE 802.1Q Tunneling, on page 124
IEEE 802.1Q Tunneling and Incompatibilities, on page 122
Example: Configuring an IEEE 802.1Q Tunneling Port, on page 143
Configuring Layer 2 Protocol Tunneling
SUMMARY STEPS
1. configure terminal
2. interface interface-id
3. Use one of the following:
• switchport mode access
• switchport mode dot1q-tunnel
4. l2protocol-tunnel [cdp | lldp | point-to-point | stp | vtp]
5. l2protocol-tunnel shutdown-threshold [ packet_second_rate_value | cdp | lldp point-to-point | stp |
vtp]
6. l2protocol-tunnel drop-threshold [ packet_second_rate_value | cdp | lldp | point-to-point | stp | vtp]
7. exit
8. errdisable recovery cause l2ptguard
9. l2protocol-tunnel cos value
10. end
11. show l2protocol
12. copy running-config startup-config
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
OL-29440-01
135
Configuring IEEE 802.1Q and Layer 2 Protocol Tunneling
Configuring Layer 2 Protocol Tunneling