Cisco Systems WSC2960XR48FPSI Manual De Usuario
Purpose
Command or Action
switch resets, it will default to VTP server mode, and the extended-range
VLAN IDs will not be saved.
VLAN IDs will not be saved.
startup-config
This step is not required for VTP version 3 because VLANs
are saved in the VLAN database.
are saved in the VLAN database.
The procedure for assigning static-access ports to an
extended-range VLAN is the same as for normal-range VLANs.
extended-range VLAN is the same as for normal-range VLANs.
Note
Related Topics
Extended-Range VLAN Configuration Guidelines, on page 45
Example: Creating an Extended-Range VLAN, on page 57
Creating an Extended-Range VLAN with an Internal VLAN ID
If you enter an extended-range VLAN ID that is already assigned to an internal VLAN, an error message is
generated, and the extended-range VLAN is rejected. To manually free an internal VLAN ID, you must
temporarily shut down the routed port that is using the internal VLAN ID.
generated, and the extended-range VLAN is rejected. To manually free an internal VLAN ID, you must
temporarily shut down the routed port that is using the internal VLAN ID.
SUMMARY STEPS
1. show vlan internal usage
2. configure terminal
3. interface interface-id
4. shutdown
5. exit
6. vtp mode transparent
7. vlan vlan-id
8. exit
9. interface interface-id
10. no shutdown
11. end
12. copy running-config startup config
Catalyst 2960-XR Switch VLAN Configuration Guide, Cisco IOS Release 15.0(2)EX1
54
OL-29440-01
Configuring VLANs
How to Configure Extended-Range VLANs