Cisco Systems N6001SBUNP1 Manual De Usuario
S e n d d o c u m e n t a t i o n c o m m e n t s t o n e x u s 5 k d o c s @ c i s c o . c o m .
D-3
Cisco Nexus 6000 Series Hardware Installation Guide
OL-xxxxx-xx
Appendix D LEDs
Port LEDs
Ethernet Port LEDs
lists the LED descriptions for the RJ-45 Ethernet port LEDs.
Ethernet and Fibre Channel LEDs
There are activity LED’s per-port on the Cisco Nexus 6004 faceplate. The LEMs and GEMs have the
same port level indicators as the fixed ports. Since 40G ports are comprised of 4x 10G ports, they wi
have 4x LEDs, one-LED-per-10G-port. Each LED represents the status of the 10G link within the 40G
bundle, and follows the behavior in the table below.
same port level indicators as the fixed ports. Since 40G ports are comprised of 4x 10G ports, they wi
have 4x LEDs, one-LED-per-10G-port. Each LED represents the status of the 10G link within the 40G
bundle, and follows the behavior in the table below.
describes the behavior of the port LEDs.
Table D-2
Ethernet Port LED Descriptions
LED
Status
Description
Left
Off
No link
Solid green
Physical link
Right
Off
No activity
Blinking green
Activity
Table D-3
Port-Level LEDs
Link State
LED State
Notes
Link Down
OFF
—
POST failed on port
AMBER_ON
—
Administrative down
OFF/AMBER_ON
Depending on the product you look at, the
LED could be off, or solid amber
Link Up,
port in STP blocked
state
state
AMBER_ON
Blinks based on network activity
Link Up,
port in STP forwarding
state
state
GREEN_ON
Blinks based on network activity
Link Up,
CRC errors
ALT_GREEN_AMBER
LED alternates between Amber
and Green for 2 seconds (at 0.5
second intervals) when it observes
errors on the link. This is the error
behavior on the Cat3K line of
products.