Cisco Systems WSC2960X24PDL Manual De Usuario
Purpose
Command or Action
Removes any existing SPAN configuration for the session.
no monitor session {session_number | all |
local | remote}
local | remote}
Step 5
• For session_number, the range is 1 to 66.
Example:
Switch(config)#
no monitor session 1
• all—Removes all SPAN sessions.
• local—Removes all local sessions.
• remote—Removes all remote SPAN sessions.
Specifies the RSPAN session and the source RSPAN VLAN.
monitor session session_number source
remote vlan vlan-id
remote vlan vlan-id
Step 6
• For session_number, the range is 1 to 66.
Example:
Switch(config)#
monitor session 1
source remote vlan 901
• For vlan-id, specify the source RSPAN VLAN to monitor.
Specifies the RSPAN session and the destination interface.
monitor session session_number destination
interface interface-id
interface interface-id
Step 7
• For session_number, enter the number defined in Step 6.
Example:
Switch(config)#
monitor session 1
• In an RSPAN destination session, you must use the same session
number for the source RSPAN VLAN and the destination port.
destination interface
gigabitethernet2/0/1
gigabitethernet2/0/1
• For interface-id, specify the destination interface. The destination
interface must be a physical interface.
• Though visible in the command-line help string, encapsulation
replicate is not supported for RSPAN. The original VLAN ID is
overwritten by the RSPAN VLAN ID, and all packets appear on
the destination port as untagged.
overwritten by the RSPAN VLAN ID, and all packets appear on
the destination port as untagged.
Returns to privileged EXEC mode.
end
Example:
Switch(config)#
end
Step 8
Creating an RSPAN Destination Session and Configuring Incoming Traffic
Beginning in privileged EXEC mode, follow these steps to create an RSPAN destination session, to specify
the source RSPAN VLAN and the destination port, and to enable incoming traffic on the destination port for
a network security device (such as a Cisco IDS Sensor Appliance).
the source RSPAN VLAN and the destination port, and to enable incoming traffic on the destination port for
a network security device (such as a Cisco IDS Sensor Appliance).
Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX
OL-29044-01
89
Configuring SPAN and RSPAN
Creating an RSPAN Destination Session and Configuring Incoming Traffic