Cisco Systems WSC2960X24PDL Manual De Usuario

What to Do Next

You must reenable CDP to use it.

Related Topics

Enabling CDP

CDP is enabled by default.

Switch clusters and other Cisco devices (such as Cisco IP Phones) regularly exchange CDP messages.
Disabling CDP can interrupt cluster discovery and device connectivity.

Note

Beginning in privileged EXEC mode, follow these steps to enable CDP when it has been disabled.

Before You Begin

CDP must be disabled, or it cannot be enabled.

SUMMARY STEPS

1. configure terminal

2. cdp run

3. end

DETAILED STEPS

Purpose

Command or Action

Enters the global configuration mode.

configure terminal

Example:

Switch#

configure terminal

Step 1

Enables CDP if it has been disabled.

cdp run

Example:

Switch(config)#

cdp run

Step 2

Returns to privileged EXEC mode.

end

Example:

Switch(config)#

end

Step 3

Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX

OL-29044-01

Configuring the Cisco Discovery Protocol

Enabling CDP