Cisco Systems WSC2960X24PDL Manual De Usuario
second line specifies the destination of these traps and overwrites any previous snmp-server host commands
for the host cisco.com.
for the host cisco.com.
Switch(config)#
snmp-server enable traps entity
Switch(config)#
snmp-server host cisco.com restricted entity
This example shows how to enable the switch to send all traps to the host myhost.cisco.com using the community
string public:
string public:
Switch(config)#
snmp-server enable traps
Switch(config)#
snmp-server host myhost.cisco.com public
This example shows how to associate a user with a remote host and to send auth (authNoPriv)
authentication-level informs when the user enters global configuration mode:
authentication-level informs when the user enters global configuration mode:
Switch(config)#
snmp-server engineID remote 192.180.1.27 00000063000100a1c0b4011b
Switch(config)#
snmp-server group authgroup v3 auth
Switch(config)#
snmp-server user authuser authgroup remote 192.180.1.27 v3 auth md5 mypassword
Switch(config)#
snmp-server user authuser authgroup v3 auth md5 mypassword
Switch(config)#
snmp-server host 192.180.1.27 informs version 3 auth authuser config
Switch(config)#
snmp-server enable traps
Switch(config)#
snmp-server inform retries 0
Feature History and Information for Simple Network
Management Protocol
Management Protocol
Modification
Release
This feature was introduced.
Cisco IOS 15.0(2)EX
Catalyst 2960-X Switch Network Management Configuration Guide, Cisco IOS Release 15.0(2)EX
64
OL-29044-01
Configuring Simple Network Management Protocol
Feature History and Information for Simple Network Management Protocol