Cisco Systems VCO/4K Manual De Usuario

The connectors mounted on the front pane are:

:

The connectors mounted on the board are:

The LEDs mounted on the board are:

The hard disk drive is a SCSI-compatible drive that is used as the system controller’s main data storage
facility. The hard disk drive requires +5 volts and +12 volts DC to operate. The hard disk drive is shown
in Figure 4-2. The Storage/Control I/O Module supports the hard disk drive LED. The LED is located
on the Combined Controller and is visible from the front of the system (see Figure 4-3).

4 serial ports

DB-25

SCSI port

50-pin mini-SCSI connector

Ethernet

DB-15

Printer

36-pin Centronics

SCSI

DIN 64

MODEM

20-pin IDC connector

MODEM power

5-pin header

ENET

If illuminated, shows that power is available to the
Ethernet

SCSI

If illuminated, shows that there is SCSI termination
power