Cisco Systems WSC4500X16SFP Manual De Usuario

This example shows how to perform a software upgrade:

Switch# config terminal

Switch(config)# config-register 0x2

Switch(config)# boot system flash slot0:cat4000-i5s-mz.122-20.EWA

Switch(config)# redundancy

Switch(config-red)# main-cpu

Switch(config-r-mc)# auto-syn standard

Switch(config-r-mc)# end

Switch# copy running-config start-config

Switch# redundancy reload peer

Switch# redundancy force-switchover 

Switch#

This example illustrates how to verify that the running configuration on the active supervisor engine has 
successfully synchronized with the redundant supervisor engine:

Switch# config terminal

Switch(config)# redundancy

Switch(config-red)# main-cpu

Switch(config-r-mc)# auto-sync standard

4d01h: %C4K_REDUNDANCY-5-CONFIGSYNC: The bootvar has been successfully synchronized to the 

standby supervisor

4d01h: %C4K_REDUNDANCY-5-CONFIGSYNC: The config-reg has been successfully synchronized to 

the standby supervisor

4d01h: %C4K_REDUNDANCY-5-CONFIGSYNC: The startup-config has been successfully synchronized 

to the standby supervisor

4d01h: %C4K_REDUNDANCY-5-CONFIGSYNC: The private-config has been successfully synchronized 

to the standby supervisor

The example above shows that the boot variable, the config-register, and the startup configuration from 
the active supervisor engine have successfully synchronized to the redundant supervisor engine.

The console port on the redundant supervisor engine is not available.

To manipulate the redundant supervisor engine bootflash, perform one or more of the following tasks:

Switch# dir slaveslot0:

target_filename

or:

Switch# dir slavebootflash:

target_filename 

Lists the contents of the slot0: device on the redundant 
supervisor engine.

Lists the contents of the bootflash: device on the redundant 
supervisor engine.

Switch# delete slaveslot0:

target_filename

or:

Switch# delete slave bootflash:

target_filename 

Deletes specific files from the slot0: device on the redundant 
supervisor engine.

Deletes specific files from the bootflash: device on the 
redundant supervisor engine.

Switch# squeeze slaveslot0:

target_filename

or:

Switch# squeeze slavebootflash:

target_filename 

Squeezes the slot0: device on the redundant supervisor 
engine.

Squeezes the bootflash: device on the redundant supervisor 
engine.