Cisco Systems WSC4500X16SFP Manual De Usuario
10-13
Software Configuration Guide—Release 12.2(25)SG
OL-7659-03
Chapter 10 Understanding and Configuring VLANs, VTP, and VMPS
VLAN Trunking Protocol
Configuring VTP
The following sections describe how to configure VTP:
•
•
•
•
•
Configuring VTP Global Parameters
The following sections describe configuring the VTP global parameters:
•
•
•
Configuring a VTP Password
To configure the VTP password, perform this task:
This example shows how to configure a VTP password:
Switch# vtp password WATER
Setting device VLAN database password to WATER.
Switch#show vtp password
VTP Password:WATER
Switch#
Enabling VTP Pruning
To enable VTP pruning in the management domain, perform this task:
Command
Purpose
Switch# [no] vtp password
password_string
Sets a password for the VTP domain. The password can
be from 8 to 64 characters.
be from 8 to 64 characters.
Uses the no keyword to remove the password.
Command
Purpose
Step 1
Switch# [no] vtp pruning
Enables VTP pruning in the management domain.
Use the no keyword to disable VTP pruning in the
management domain.
management domain.
Step 2
Switch# show vtp status
Verifies the configuration.