Cisco Systems WSC4500X16SFP Manual De Usuario

Switch(config-if)# switchport mode access 

Switch(config-if)# switchport access vlan 200 

Switch(config-if)# no shutdown 

Switch(config-if)# end 

Switch# exit 

This example shows how to verify the running configuration:

Switch# show running-config interface fastethernet 5/6

Building configuration...

!

Current configuration :33 bytes

interface FastEthernet 5/6

switchport access vlan 200

switchport mode access

end

This example shows how to verify the switch port configuration:

Switch# show running-config interface fastethernet 5/6 switchport

Name:Fa5/6

Switchport:Enabled

Administrative Mode:dynamic auto

Operational Mode:static access

Administrative Trunking Encapsulation:negotiate

Operational Trunking Encapsulation:native

Negotiation of Trunking:On

Access Mode VLAN:1 (default)

Trunking Native Mode VLAN:1 (default)

Administrative private-vlan host-association:none

Administrative private-vlan mapping:none

Operational private-vlan:none

Trunking VLANs Enabled:ALL

Pruning VLANs Enabled:2-1001

Switch# 

To clear the Layer 2 configuration on an interface, perform this task:

This example shows how to clear the Layer 2 configuration on the Fast Ethernet interface 5/6:

Switch# configure terminal 

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)# default interface fastethernet 5/6 

Switch(config)# end 

Switch# exit 

Switch(config)# default interface {fastethernet | 

| tengigabitethernet} 

slot/port 

Specifies the interface to clear.

Switch(config-if)# end 

Exits interface configuration mode.

Switch# show running-config interface 

{fastethernet | gigabitethernet | 

} 

slot/port 

Displays the running configuration of the interface.

Switch# show interfaces [{fastethernet | 

| tengigabitethernet} 

slot/port] 

 

Displays the switch port configuration of the interface.