Cisco Systems WSC4500X16SFP Manual De Usuario

switchport port-security

# Ensure port-security age is greater than one minute

# and use inactivity timer

# “Port-security maximum 1” is the default and will not

# Show up in the config

switchport port-security violation restrict

switchport port-security aging time 2

switchport port-security aging type inactivity

# Configure port as an edge network port

spanning-tree portfast

spanning-tree bpduguard enable

Switch# show parser macro description 

Interface    Macro Description

--------------------------------------------------------------

Fa2/9        cisco-desktop

--------------------------------------------------------------

This example shows how to use the system-defined macro cisco-phone to assign a value of 35 to the 
access VLAN and 56 to the voice VLAN on the Fast Ethernet interface 2/9.

This macro requires the $AVID and $VVID keywords, which are the access and voice VLANs of the 
port.

Switch(config)# interface fastethernet2/9

Switch(config-if)# macro apply cisco-phone

Switch(config-if)# macro description cisco-phone $AVID 35 $VVID 56

Switch(config-if)# end

Switch# show parser macro name cisco-phone

Macro name : cisco-phone

Macro type : customizable

# VoIP enabled interface - Enable data VLAN

# and voice VLAN (VVID)

# Recommended value for access vlan (AVID) should not be 1\

switchport access vlan $AVID [access_vlan_id]

switchport mode access

# Update the Voice VLAN (VVID) value which should be

# different from data VLAN 

# Recommended value for voice vlan (VVID) should not be 1

switchport voice vlan $VVID [voice_vlan_id]

# Enable port security limiting port to a 3 MAC

# addressess -- One for desktop and two for phone

switchport port-security

switchport port-security maximum 3

# Ensure port-security age is greater than one minute

# and use inactivity timer

switchport port-security violation restrict

switchport port-security aging time 2

switchport port-security aging type inactivity

# Enable auto-qos to extend trust to attached Cisco phone

auto qos voip cisco-phone

# Configure port as an edge network port

spanning-tree portfast

spanning-tree bpduguard enable@

Switch# show parser macro description 

Interface    Macro Description

--------------------------------------------------------------