Cisco Systems WSC4500X16SFP Manual De Usuario

Switch# show interfaces fastethernet 5/6 etherchannel 

Port state    = EC-Enbld Up In-Bndl Usr-Config

Channel group = 1           Mode = Desirable     Gcchange = 0

Port-channel  = Po1         GC   = 0x00010001 

Port indx     = 0           Load = 0x55

Flags:  S - Device is sending Slow hello.  C - Device is in Consistent state.

        A - Device is in Auto mode.        P - Device learns on physical port.

        d - PAgP is down.

Timers: H - Hello timer is running.        Q - Quit timer is running.

        S - Switching timer is running.    I - Interface timer is running.

Local information:

                                Hello    Partner  PAgP     Learning  Group

Port      Flags State   Timers  Interval Count   Priority   Method  Ifindex

Fa5/6     SC    U6/S7           30s      1        128        Any      56

Partner's information:

          Partner              Partner          Partner         Partner Group

Port      Name                 Device ID        Port       Age  Flags   Cap.

Fa5/6     JAB031301            0050.0f10.230c   2/47        18s SAC     2F

Age of the port in the current state: 00h:10m:57s

This example shows how to verify the configuration of port-channel interface 2 after the interfaces have 
been configured:

Switch# show etherchannel 2 port-channel 

                Port-channels in the group:

                ----------------------

Port-channel: Po2

------------

Age of the Port-channel   = 00h:23m:33s

Logical slot/port   = 10/2           Number of ports in agport = 2

GC                  = 0x00020001      HotStandBy port = null

Port state          = Port-channel Ag-Inuse

Ports in the Port-channel:

Index   Load   Port

-------------------

  1     00

 Fa5/6

  0     00

 Fa5/7

Time since last port bundled:    00h:23m:33s    Fa5/6

Switch# 

The LACP system ID is the combination of the LACP system priority value and the MAC address of the 
switch.