Cisco Systems WSC4500X16SFP Manual De Usuario

For more information on load sharing, refer to the Configuring Cisco Express Forwarding module of the 
Cisco IOS documentation at this URL: 

The include-ports option does not apply to software-switched traffic on the Catalyst 4500 series 
switches.

You can view the collected CEF information. To view CEF information, perform this task:

To display information about IP traffic, perform this task:

This example shows how to display information about IP unicast traffic on interface Fast Ethernet 3/3:

Switch# show interface fastethernet 3/3 | begin L3 

  L3 in Switched: ucast: 0 pkt, 0 bytes - mcast: 12 pkt, 778 bytes mcast

  L3 out Switched: ucast: 0 pkt, 0 bytes - mcast: 0 pkt, 0 bytes 

     4046399 packets input, 349370039 bytes, 0 no buffer

     Received 3795255 broadcasts, 2 runts, 0 giants, 0 throttles

<...output truncated...>

Switch#

The IP unicast packet count is updated approximately every five seconds.

IP unicast statistics are gathered on a per-interface basis. To display IP statistics, perform this task:

Switch# show ip cef 

Displays the collected CEF information.

Switch# show interface 

type slot/interface 

| begin L3

Displays a summary of IP unicast traffic.

Switch# show interface 

type number 

Displays IP statistics.