Cisco Systems WSC4500X16SFP Manual De Usuario

This example shows how to verify the configuration:

Switch# show policy-map ipp5-policy 

show policy ipp5-policy

 Policy Map ipp5-policy

  class  ipp5

   set ip precedence 6

dbl

police 2000000000 2000000 conform-action transmit exceed-action

policed-dscp-transmit 

Switch#

To attach a policy map to an interface, perform this task:

This example shows how to attach the policy map named pmap1 to Fast Ethernet interface 5/36:

Switch# configure terminal 

Enter configuration commands, one per line.  End with CNTL/Z.

Switch(config)# interface fastethernet 5/36 

Switch(config-if)# service-policy input pmap1

Switch(config-if)# end

This example shows how to verify the configuration:

Switch# show policy-map interface fastethernet 5/36 

FastEthernet6/1

   service-policy input:p1

     class-map:c1 (match-any)

       238474 packets

       match:access-group 100

        38437 packets

       police:aggr-1

        Conform:383934 bytes Exceed:949888 bytes

    class-map:class-default (match-any)

      0 packets

      match:any 

        0 packets

Switch#

Switch(config)# interface {vlan 

vlan_ID | 

{fastethernet | gigabitethernet} 

slot/interface

 | 

number} 

Selects the interface to configure.

Switch(config-if)# [no] service-policy input 

policy_map_name 

Attaches a policy map to the input direction of the 
interface. Use the no keyword to detach a policy map 
from an interface.

Switch(config-if)# end 

Exits configuration mode.

Switch# show policy-map interface {vlan 

vlan_ID | 

{fastethernet | gigabitethernet} 

slot/interface} 

Verifies the configuration.