Cisco Systems WSC4500X16SFP Manual De Usuario
C H A P T E R
2-1
Software Configuration Guide—Release 12.2(25)SG
OL-7659-03
2
Command-Line Interfaces
This chapter describes the CLIs you use to configure the Catalyst 4500 series switch. This chapter
includes the following major sections:
includes the following major sections:
•
•
•
•
•
•
Note
For complete syntax and usage information for the commands used in this chapter, refer to the
Catalyst 4500 Series Switch Cisco IOS Command Reference and related publications at
Catalyst 4500 Series Switch Cisco IOS Command Reference and related publications at
Accessing the Switch CLI
The following sections describe how to access the switch CLI:
•
•
Accessing the CLI Using the EIA/TIA-232 Console Interface
Note
EIA/TIA-232 was known as recommended standard 232 (RS-232) before its acceptance as a standard by
the Electronic Industries Alliance (EIA) and Telecommunications Industry Association (TIA).
the Electronic Industries Alliance (EIA) and Telecommunications Industry Association (TIA).
Perform the initial switch configuration over a connection to the EIA/TIA-232 console interface. Refer
to the Catalyst 4500 Series Switch Module Installation Guide for console interface cable connection
procedures.
to the Catalyst 4500 Series Switch Module Installation Guide for console interface cable connection
procedures.