Cisco Systems WSC4500X16SFP Manual De Usuario

  Full-duplex, 100Mb/s

  ARP type: ARPA, ARP Timeout 04:00:00

  Last input 00:00:54, output never, output hang never

  Last clearing of "show interface" counters never

  Input queue: 50/2000/0/0 (size/max/drops/flushes); Total output drops: 0

  Queueing strategy: fifo

  Output queue: 0/40 (size/max)

  5 minute input rate 0 bits/sec, 0 packets/sec

  5 minute output rate 0 bits/sec, 0 packets/sec

     50 packets input, 11300 bytes, 0 no buffer

     Received 50 broadcasts, 0 runts, 0 giants, 0 throttles

     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored

     0 input packets with dribble condition detected

     1456 packets output, 111609 bytes, 0 underruns

     0 output errors, 0 collisions, 0 interface resets

     0 babbles, 0 late collision, 0 deferred

     1 lost carrier, 0 no carrier

     0 output buffer failures, 0 output buffers swapped out

Switch#

You can add a description about an interface to help you remember its function. The description appears 
in the output of the following commands: show configuration

, 

, 

and 

show interfaces.

To add a description for an interface, enter the following command:

This example shows how to add a description on Fast Ethernet interface 5/5:

Switch(config)# interface fastethernet 5/5 

Switch(config-if)# description Channel-group to "Marketing" 

These subsections describe jumbo frame support:

The following ports and modules support jumbo frames:

Supervisor uplink ports

WS-X4306-GB: all ports

WS-X4232-GB-RJ: ports 1-2

WS-X4418-GB: ports 1-2

WS-X4412-2GB-TX: ports 13-14

Switch(config-if)# description 

string 

Adds a description for an interface.