Cisco Systems 520 Manual De Usuario
4-4
Cisco Secure Router 520 Series Hardware Installation Guide
OL-12892-01
Chapter 4 Router Installation
Typical Installation
To install a Cisco Secure Router 520 ADSL-over-POTS router, follow these steps:
Step 1
If you have a wireless router, first connect the radio antenna to the router. See the
Step 2
Connect the server, PC, or workstation to the router. See the
.
Step 3
(Optional) If you need to connect more than four PCs, connect an external Ethernet switch to the router’s
built-in switch. See the
built-in switch. See the
Step 4
Connect the ADSL line. See the
.
Step 5
.
Step 6
To configure the router software by using the command-line interface (CLI) or to troubleshoot problems,
connect a terminal or PC to the console port. See the
connect a terminal or PC to the console port. See the
Step 7
(Optional) To use the console port as a backup link to the WAN port in case the ADSL service goes down,
connect an analog modem to the console port. See the
connect an analog modem to the console port. See the